3D Drucker für die Industrie


3
Druckergrößen

offenes System

100°C
Bauraumtemperatur
maximale Festigkeit
15+
Filamente

Pellets coming soon

EL-40

Der Einstieg in den Industriedruck

AB  27.467€   

net

Build size: 400 x 260 x 400 mm

    Print volume: 40 Liter

    Print bed temperature: up to 150°C 

    Nozzle temperature: up to 360°C

    Buildchamber heating: 60°C

    Automatic XYZ calibration​

    Closed loop axis system​

    Filament run-out sensor​

    Filament drying​

    Filament spool size: 1 to 10 KG

    Soluble support material​

    IDEX Dysensystem

    Nozzle cleaning station​

    Copymode

    Webcam

    Water cooling​

    -

    Magnetic clamping system​

    Peak power consumption: 2,700 watts

    Average power consumption: 900 
    watts

    Electrical connection: 230 volts

    Weight: approx. 170 KG

    BOXMAßE: 176 x 100 x 89 cm

EL-140

Gemacht für die Serienfertigung 

AB  76.692€   

net

    Build size: 570 x 450 x 570 mm

    Print volume: 140 Liter

    Print bed temperature: up to 160°C 

    Nozzle temperature: up to 420°C​

    Buildchamber heating: 100°C​

    Automatic XYZ calibration​

    Closed loop axis system​

    Filament run-out sensor​

    Filament drying​

    Filament spool size: 1 to 10 KG​

    Soluble support material​

    IDEX Düsensystem

    Nozzle cleaning station​

    Copymode

    Webcam

    Water cooling​

    Vacuum clamping table optional​

    Magnetic clamping system​

    Peak power consumption: 4,500 watts​

    Average power consumption: 1,300 watts

    Electrical connection: 400 volts​

    Weight: approx. 500 KG​

    BOXMAßE: 192 x 123 x 89 cm

EL-1040

Große Teile sind meine Stärke

Coming 

soon  

    Build size: 1.300 x 1.000 x 800 mm

    Print volume: 1040 Liter

    Print bed temperature: up to 160°C 

    Nozzle temperature: up to 420°C​

    Buildchamber heating: 100°C​

    Automatic XYZ calibration​

    Closed loop axis system​

    Filament run-out sensor​

    Filament drying​

    Pellets

    Soluble support material​

    Pelletsextruder 

    Nozzle cleaning station​

    Copymode

    Webcam

    Water cooling​

    Vacuum clamping table optional​

    Magnetic clamping system​

    Peak power consumption: 9,500 watts

    Average power consumption: 4,000 watts

    Electrical connection: 400V / 32A

    Weight: approx. 2,000 KG

    BOXMAßE: TBD

Orca 
Slicer

Klipper Firmware

Unser Allrounder für die Serienfertigung EL-140 

FEATURES

Open system


With our EVO-lizer 3D printers, we offer you the best of both worlds. On the one hand, we have an open system that gives full access to all parameters and allows you to use your own materials. On the other hand, we offer you a variety of our own materials including tested parameters.

Your advantages:

  • Good predefined parameter sets
  • Independence from the manufacturer
  • Lower material costs
  • Significantly cheaper “Total Cost of Ownership”
  • Open component programming


Offene vs. geschlossene 3D Drucker

Great variety of materials


Whether ESD, soft, hard, UV or heat-resistant - with our 16 materials we always have the right filament solution for you. If this is not the case, you can always use filaments from third-party providers thanks to our open systems.

Your advantages:

  • Predefined parameter sets
  • Tried and tested filaments
  • 1 to 10KG spools

10KG Filament Spule
3D Druckkopf

Fully automatic XYZ calibration


Using an integrated tool length sensor, we can measure not only the nozzle height, but also the X and Y deviations of the nozzles from one another.

Your advantages:

  • Fully automatic calibration
  • High process reliability
  • High reproducibility​
  • No more test prints necessary after changing nozzles
  • Better dual printing results



Anti-oozing station for drip-free dual printing


The oozing station prevents material from leaking from one nozzle while another nozzle is printing. This prevents so-called oozing (stringing and dripping on the components).

Your advantages:

  • Very good surface quality with dual printing
  • High reproducibility​
  • No material decomposition in the nozzle
  • Significantly less cleaning effort
  • Shorter printing times

Heated and dried filament chamber


Many filaments absorb humidity from the environment, which can lead to significantly poorer printing results and even print failures. With our integrated drying chamber and its sensors, you can always keep an eye on the moisture and thus increase the quality of your components!

Your advantages:

  • Better print quality
  • High reproducibility​
  • Less waste with up to 10 kg of filament


Filamenttrocknung mit bis zu 20KG
Automatische Bettvermessung für 3D Drucker

Automatische Druckbettvermessung 


Der integrierte, induktive Sensor vermisst vor dem Druckstart vollautomatisch die Ebenheit des Bettes. 

Your advantages:

  • No manual measuring necessary
  • High reproducibility​
  • Better component adhesion

IDEX System


Increase your productivity with up to 4 printheads that can be used at the same time, as well as the associated output and material combination options.

Your advantages:

  • Paralleler Druck von 2 gleichen Bauteilen -> Verdoppelung der Druckgeschwindigkeit bei gleichbleibender Bauteilfestigkeiten!
  • Combination of different nozzle diameters -> Fine surface quality for external walls and fast output for filling
  • Less set-up times when using different materials regularly
  • Kombination von 2 Materialien in einem Druckjob

M to XXL print area 


Your components are not built on sand, but on a neatly milled aluminum plate, which in turn is mounted on a milled steel frame.

Your advantages:

  • Prints larger than a Euro pallet are becoming a reality
  • Choice between magnetic and/or vacuum clamping system
  • Heated printbed minimizes distortion
  • No commitment to a manufacturer's proprietary surface material
  • Clever linear expansion concept to minimize deformation when heated

XXL 3D Drucktisch

Ball screw, linear guides and reinforced belts


In addition to the design, reproducibility and stability begin with the correct selection of axle components. In 3D printing, in addition to size and dynamics, temperature resistance and linear expansion are also important. With THK we have an industrial partner who can guarantee this.

Your advantages:

  • Positioning in the hundredth range
  • Low maintenance and wear-resistant
  • Hardly any backlash effect
  • Industry standard guarantees spare parts availability for decades
  • Closed loop drive system



Kugelumlaufspindel
Motorenansteuerung für 3D Drucker

Hardware and software Industry 4.0


Your advantages:

  • Upgrade security and easy expandability thanks to the modular CAN bus system
  • Communication with G-Code standard
  • Automatic updates via Internet or USB stick
  • API for reading real-time data

 

Up to 7,200 watts make the buildchamber heating glow


When processing plastics in general and in the 3D printing welding process in particular, the process temperatures and controllable cooling are crucial for an excellent result.


Ihre Vorteile: 

  • Significantly less shrinkage and distortion
  • Higher component strength


Heizungselektronik für 3D Drucker
Aufbau 3D Drucker Extruder

Easy servicing

 

Your advantages:

  • Maintenance points accessible without tools
  • Printhead change within minutes
  • Nozzle change in seconds